|
INTERIOR PANEL INSTRUCTIONS
PART NO. PZPNI126
IMPORTANT:
Be sure to test fit all parts to the vehicle before painting as
PTEAZER
will not be responsible for the painting on a defective part that
must be returned.
NOTE:
The panel conversion requires intensive bodywork.
The installation of the panel conversion needs to done by a professional
body shop familiar
with the fabrication of fiberglass to steel bonding requirements.
The
Interior Panels are designed to glue over the rear doorframes
and quarter panel frames.
If you
require the storage bin, the opening is marked clearly for cutting
and you can glue the bucket from the existing side panel in the
back. Another option is to extend the floor all the way to the
back of the front seats. If so, floor needs to be installed first.
The height is marked on the panels. We extended our floor with
ply so the panels can fasten to it.
Step 1 Test fit and trim panels as necessary on edges.
Step 2
Mark contact spots and make packers, and glass or glue to back
of Interior Panel and test fit again.
Step 3
Make good the face of the panel ready for covering options.
Step 4
Once panel is covered, test fit again. Glue in position as required.
When happy with fit, screw the panel to the floor, and floor covering
will cover screws.
For technical
assistance, please call our toll-free telephone number 877-783-2937.
IMPORTANT
INFORMATION:
PTEAZER INC. warranties all parts 100% prior to painting or installation.
Please report any shipping or other damage immediately upon opening
of package. All damages must be reported within 5 days of receipt.
Toll-Free Tel: 877-783-2937
PTEAZER
parts and accessories are protected by trademark, copyright and
patent. Any attempt to reproduce, or otherwise copy any part or
accessory will be aggressively prosecuted to the fullest extent
of the law.
PTEAZER®
is a registered trademark of PTEAZER, INC. Chrysler and PT CRUISER are registered
trademarks of the Daimler Chrysler Corporation. PTEAZER.COM is not affiliated
with the Daimler Chrysler Corporation. The products, ideas and opinions offered
on the site are in no way part of or otherwise linked to the Daimler Chrysler
Corporation. All PTEAZER® bodyparts and accessory products as shown herein
are protected by patent, trademark and copyright. Any and all attempts to copy
or otherwise reproduce will be prosecuted to the fullest extent of the law.
©PTEAZER 2004
|